Boats

 

We are making boats we are going to race them on water. to keep it from sinking I am going to put some plastic on the bottom of the boat and hope that it does not sink. I think mine might sink but we will see what happens.  I hope this will work the sail might fall. But lets hope not. I will build on the design over time but this is what I have so far. The base of the boat will be made out of cardboard and plastic the plastic is so the cardboard will not turn all soggy and sink. The sail will be made out of cardboard and plastic as well. I will have a skewer to hold the sail. And the little keels  will be so the boat can float better.

My sail car

 So a couple days ago we made sail cars and we raced them. But before we raced them we had to make them it was not very easy but it was not very hard. First we had to make the plan of how we wanted our sail car to be. We basically had to make blue prints. So we had to make the bottom of the sail car we used card broad. Then we got a stick and we got some bottle caps and hot clued the bottle caps onto the stick as wheels. Well we waited for the hot glue to dry we got another stick and got a peace of paper and we cut out some shapes as sails and we had to glue or tape the shape you  did to the stick for it to stay. When the glue dried on the wheels we needed to stick the wheels and stick onto the card broad. After you did that you need to get your stick and sail and glue it onto your sail car and you can also do more than one sail. I would only do 1 to 3 Because I think it would not work if you did more than that. After that you should have a sail car and you are ready to race. 

Here's mine!

All about me 2021

 

The steps I went through to make my self portrait

 First we had a broad and we had to put news paper on it with a glue stick.  after that we had to find some words that matched us after that we had to paint over it with all of the colours that we all wanted after that we drew the portrait and then we traced it on the broad.   we had to put lack o the bit of paper that we were tracing it off so that it would show through. after that we had to paint the outline black and we got to draw some shapes then we had to paint the broad then we had to fill in with black like inside of our body but like not colouring it in but just the outline of us like our uniform and eyes and mouth nose and everything like that. and then you have got a self portrait.  

Nothing was really challenging just for when i had to paint the outline with black with the smallest brush ever. 

Here is my self portrait